Archive for February, 2018
-
![I wanted to mod my Gotek running the Cortex firmware to support a display, and the OLED 128×32 displays seem neat, and cheap, and well supported. Whilst doing that, I […]](http://www.binarydevotion.com/wp-content/uploads/2018/02/DFUfm-115x115.png "Howto: flash a Gotek with no programmer")
Howto: flash a Gotek with no programmer
Posted on February 16, 2018 | 9 CommentsI wanted to mod my Gotek running the Cortex firmware to support a display, and the OLED 128×32 displays seem neat, and cheap, and well supported. Whilst doing that, I […]
![Chances are that if you have an old Amiga, it’s not quite the colour it once was: it’s slowly doing a David Dickinson and getting more tanned as it gets […]](http://www.binarydevotion.com/wp-content/uploads/2018/03/triumvirate.jpg "Howto: Paint your Amiga 500, 1000 for good results"){kind=small}
![After being tempted for years to tinker with a 3D printer, I took the plunge last Autum. But what am I doing with it? Printing all those bits that you […]](http://www.binarydevotion.com/wp-content/uploads/2018/03/bda1k-36x36.png "Modelling the Amiga: Amiga 1000 front flap for modification"){kind=small}
![I wanted to mod my Gotek running the Cortex firmware to support a display, and the OLED 128×32 displays seem neat, and cheap, and well supported. Whilst doing that, I […]](http://www.binarydevotion.com/wp-content/uploads/2018/02/DFUfm-36x36.png "Howto: flash a Gotek with no programmer"){kind=small}
