st-506 Archive
-
Archaeology: MFM / ST-506 Interface Reference
Posted on January 26, 2011 | No CommentsThe ST-506 from Shugart Associates, later Seagate, was the first de facto standard for hard drive interfacing. It was crude by modern standards, but showed that manufacturers could choose to ride on the wave of standard interfaces...
![Chances are that if you have an old Amiga, it’s not quite the colour it once was: it’s slowly doing a David Dickinson and getting more tanned as it gets […]](http://www.binarydevotion.com/wp-content/uploads/2018/03/triumvirate.jpg "Howto: Paint your Amiga 500, 1000 for good results"){kind=small}
![After being tempted for years to tinker with a 3D printer, I took the plunge last Autum. But what am I doing with it? Printing all those bits that you […]](http://www.binarydevotion.com/wp-content/uploads/2018/03/bda1k-36x36.png "Modelling the Amiga: Amiga 1000 front flap for modification"){kind=small}
![I wanted to mod my Gotek running the Cortex firmware to support a display, and the OLED 128×32 displays seem neat, and cheap, and well supported. Whilst doing that, I […]](http://www.binarydevotion.com/wp-content/uploads/2018/02/DFUfm-36x36.png "Howto: flash a Gotek with no programmer"){kind=small}
